Alat ideal untuk melindungi lingkungan & keluarga anda dari bahaya gas karbon monoksida
Mudah dan praktis digunakan, Tanpa kabel. Menggunakan 3 pcs batere AA
Dilengkapi dengan LED dan backlight untuk mempermudah pembacaan di tempat gelap
(Video demo ada dibawah)
Item Description
A perfect item for protecting your family from the dangers of carbon monoxide Advanced level of protection, easy to read with the digital display (with blue backlight), even in low light conditions.
Features
1.Loud 85 decibel alarm
2.Permanent Carbon Monoxide Sensor
3.Power: 3 x AA batteries (batere tdk termasuk)
4.After 3 minutes when connected with battery the detector enter into the work mode.
(Please kindly note:if the detector not in this mode,there is no response for co gas test.)
5.The Alarm Sound Pattern is four Short Alarm Beeps. The Red LED Will Flash While in the Alarm Mode.
6•One chirp every 30 seconds in an indication that the battery is low
(green LED still flashes once every 30 seconds) or the unit is malfunctioning(green LED is out.).
7.Alarm memory feature:
If the unit ever alarms, pressing the button, green LED will flashes once every second for one minute and the peak alarm level will be indicated on the LCD.
8•Test/Reset button to test the unit electronics and verifies proper unit operation and reset the unit during CO alarm.
9•Green and red LED lights that indicate normal operation and alarm status.
10.The unit will sound chirp and red LED flashes once as power up.
11. Power Saving feature:The alarm sound pattern is 4 beeps every 5 seconds for the first minutes•In 4 minutes,it will change to 4 beeps every minute to save the battery.
Specification:
Power Supply:3 x AA baterries (not included)
Sensitivity & Time:
30ppm, alarms after two hours
50
6•One chirp every 30 seconds in an indication that the battery is low
(green LED still flashes once every 30 seconds) or the unit is malfunctioning(green LED is out.).
7.Alarm memory feature:
If the unit ever alarms, pressing the button, green LED will flashes once every second for one minute and the peak alarm level will be indicated on the LCD.
8•Test/Reset button to test the unit electronics and verifies proper unit operation and reset the unit during CO alarm.
9•Green and red LED lights that indicate normal operation and alarm status.
10.The unit will sound chirp and red LED flashes once as power up.
11. Power Saving feature:The alarm sound pattern is 4 beeps every 5 seconds for the first minutes•In 4 minutes,it will change to 4 beeps every minute to save the battery.
Specification:
Power Supply:3 x AA baterries (not included)
Sensitivity & Time:
30ppm, alarms after two hours

08131530760